Category Archives : WANHAO RSS feed for this section

Wanhao Duplicator I3 Mini

Coming Soon (July 20th, 2017).. https://ultimate3dprintingstore.com/pages/wanhao-i3-mini-compact-3d-desktop-printer  

Mods / STL Files

Mods for the I3 Plus / Maker Select 3P Z Brace Mod by Morgajel: https://www.thingiverse.com/thing:2349318 Heated Bed Isolators (for bed shorting issue) by Joemadd3n: Inline with the September 2016 W...

Wanhao I3 Plus Firmware Description

Wanhao Changes to Marlin for Touch LCD These are the changes made to the Marlin branch to add support for the touch screen Wanhao uses on the Plus. The main board basically sends a packet out the seri...

Printer specs for slicers

Here are the main specs that can be used for setting up slicer / Cura profiles (we also have some already defined here. Machine Settings: e-steps/mm (see this page on how to configure e-steps): This v...

Duplicator I3 Plus Documentation & Factory Files

We’ve tried to gather all of the documentation that Wanhao has included with the printer. If there’s a document, or a revision of a document that we’re missing, please let us know. W...

Wanhao Duplicator I3 Plus

The Duplicator i3 Plus is an inexpensive 3d printer from Wanhao based on the Wanhao i3 design with some changes made to the power supply / controller and LCD screen. Depending on the model you have th...

Setting the Stepper current on the Melzi board

Description Stepper motors are rated for a specific current and sometimes the stepper drivers are not set correctly to match the stepper motor of if you change your motors this may need to be adjusted...

Y Axis Rod Alignment

Description If your Y axis rods are not parallel, it will twist the bed as it moves making leveling next to impossible. A symptom of this is when leveling the bed, 3 corners are right but the 4th corn...