Tag Archives : nanodlp

Visual Troubleshooting Guide

The Purpose of this Guide This guide will help troubleshoot certain processes both mechanical and software related based on images. The intent is having an easy way of looking through photos and picki...

Easy NanoDLP Install Option

Easy Install Method You will need a RaspberryPi3 to run Nanodlp on and a 8gb or greater SD card. The following kit contains a Pi3, proper power supply and enclosure or the pi3 board only. You can pick...

Adding a LCD to Nanodlp

Description If you are going to be using a RaspberryPi with Nanodlp installed then this mod may be handy. You can add a 16×2 LCD (I2C protocol) to the pi and then configure Nanodlp to use the LCD...

Adding Customized Button to Nanodlp

Adding CustomĀ Button Actions You can add your own buttons on Nanodlp to do various functions and have these accessible on certain screens all the time or only when the printer is Idle (recommended). ...

D7 NanoDLP (and standard) Firmware

AboutĀ the changes to the D7 Firmware The Wanhao D7 uses the Creation Workshop software to slice and control the printing process. The company that makes the software has changed hands and charges for...

D7 NanoDLP Installation

This page gives some background on NanoDLP and how to make it work with the D7. If you want to skip right to installing NanoDLP and the updated D7 firmware skip to the Easy Install Page. The Wanhao D7...

Skip to toolbar