Tiko Factory Documentation and Files

We’ve tried to gather all of the documentation that Tiko3d has included with the printer. If there’s a document, or a revision of a document that we’re missing, please let us know.

Slicer Profiles

These profiles are provided as a starting point.  Many settings will vary depending on the model you are slicing and your specific printer.

Start / End Gcode

This is the “start” and “end” gcode that needs to be setup in your slicers for the Tiko.

Start code:

G28 ;Home
G1 Z15.0 F6000 ;Move the platform down 15mm
;Prime the extruder
G92 E0
G1 F200 E3
G92 E0

End code:

M104 S0
M140 S0
;Retract the filament
G92 E1
G1 E-1 F300
G28 X0 Y0
M84
Skip to toolbar