Duplicator i3 Factory Documentation & Files
We’ve tried to gather all of the documentation that Wanhao has included with the printer. If there’s a document, or a revision of a document that we’re missing, please let us know.
Unboxing And Hardware Setup
- Revision A – This is the file provided by Wanhao on the SD card shipped with the initial units.
- Revision D– This is the file provided by Wanhao for the second batch of units that are shipped in two parts and need some assembly.
- Unboxing Video for the Cocoon Create
First Run Experience
- Revision A – This is the file provided by Wanhao on the SD card shipped with the initial units.
User Manuals
- WANHAO User Manual REV A – This is the new Instruction Manual that is provided in booklet form with the v2 printers.
- Cura Manual Wanhao Edition Rev.A – This is the manual for the Cura slicer that comes on the supplied SD card.
- Maker Select Quick User Guide – Quick User’s Guide pvoided by Monoprice for the Maker Select rebrand of the Duplicator i3.
- Maker Select User Manual – User manual provided by Monoprice for the Maker Select rebrand of the Duplicator i3.
Test Files
- Ready to print GCODE files
- OK(2015).gcode – “OK Hand” test file provided by Wanhao on the SD card shipped with the Duplicator i3.
- Butterfly.gcode– Test file provided by Monoprice on the SD card shipped with the Maker Select.
- Chair.gcode – Test file provided by Monoprice on the SD card shipped with the Maker Select.
- Swan.gcode – Test file provided by Monoprice on the SD card shipped with the Maker Select.
- Elephant.gcode – Test file provided by Monoprice on the SD card shipped with the Maker Select.
- Mouse.gcode – Test file provided by Malyan on the SD card shipped with the M150.
- Cat.gcode.zip – Test file provided by Malyan on the SD card shipped with the M150.
- STL files referenced by the manual(s)
- Unicorn Head by Kellesabelle – Sample STL referenced by the new Rev-A manual
- Twisted 6-sided Vase by MaakMijnldee – Sample STL referenced by the new Rev-A manual
- Cable Holder (cable clip) by bardiaesm – Sample STL referenced by the new Rev-A manual
- Geoflower by EMRL – Sample STL referenced by the new Rev-A manual
- Voronoi Lamp by Marcello – Sample STL referenced by the new Rev-A manual
- General Purpose Hook by Erikjuh – Sample STL referenced by the new Rev-A manual
- Twisted Bracelet by Gepetto – Sample STL referenced by the new Rev-A manual
Slicer Profiles
These profiles are provided as a starting point. Many settings will vary depending on the model you are slicing and your specific printer.
- Cura – (Free software, download from ultimaker.com, or from wanhao3dprinter.com.)
- Wanhao_Cura_Profile16.zip – Wanhao’s profile used on their sample prints.
- Slic3r – (Free software, download from slic3r.org.)
- Slic3r_config_bundle.zip – Profile for the Duplicator i3, includes 3 “Print Settings” profiles for 0.1mm, 0.2mm, and 0.3mm layer heights.
- Simplify 3D Profiles – (Purchase from simplify3d.com.)
- S3D-i3-PLA.zip – General profile for PLA filament.
- S3D-i3-PETG.zip – Profile for PETG filament.
- S3D-i3-NINJAFLEX.zip – Profile for Ninjaflex filament.