Category Archives : tips RSS feed for this section

Misc. Tips, Tricks, and other Information

This section contains an assortment of various tips and tricks that may not quite fit in any of the other sections of this site.

Computer Software

The following information is provide to help you get started with your chosen slicer or control applications.  Please consider these as only starting points.  You will probably need to make changes ...

Extruder PID Tuning

Description The default heat manager for the i3 printer is using the DeadTime method which usually works pretty well. I found that I had to change the PID Gain / Deadtime setting to 3 to get better re...